Overview - Driver Side Airbag
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Wiring Harness
- For the Driver Airbag Igniter -N95- and market-specific version Driver Airbag Release Valve Igniter -N490-
- Refer to CONNECTOR ON AIRBAG, REMOVING AND INSTALLING
- Steering Column Electronics Control Module -J527-
- With Spiral Spring -F350-
- Refer to OVERVIEW - STEERING COLUMN SWITCH MODULE .
- Steering Wheel
- Refer to Overview - Steering Wheel .
- Bolt
- Tightening specification. Refer to Overview - Steering Wheel .
- Driver Side Airbag
- To release use a flat-head screwdriver approximately 100 mm long
- Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING