Outer Rear Seat Backrest Locking Mechanism, Removing And Installing, A3: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the locking mechanism trim. Refer to LOCKING MECHANISM TRIM, REMOVING AND INSTALLING .
-- Use a flat-head screwdriver to pry the clamping strips -1 and 2- for the backrest cover out of the locking mechanism.
-- Remove the bolts -4-.
-- Remove the retainer -3- from the backrest frame.