Overview - Rear Seat Backrest, A3

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Rear Seat Backrest, A3

Courtesy of AUDI OF AMERICA, LLC

Nut
- Tightening specification. Refer to OVERVIEW - CENTER REAR THREE-POINT SEAT BELT .
Center Belt End Fitting/Right Seat Belt Latch
Outer Bearing Sleeve
- Place in the backrest frame and push until stop.
- Removing and Installing. Refer to OUTER BEARING SLEEVE, REMOVING AND INSTALLING .
Right Backrest
- Equipped on some models: backrest with a pass-through
- Removing and Installing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .
Securing Bracket
- For the center bracket
- Removing and Installing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .
Bolt
- 9 Nm
Inner Bearing Sleeve
Inner Bearing Journal
- 15 Nm
Rear Cover
- For the center bracket
Front Cover
- For the center bracket