Locking Mechanism Trim For Backrest With Pass-Through, Removing And Installing, Q3: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seats all the way forward.
-- Position the rear seat all the way toward the rear.
-- Fold the backrest with pass-through slightly forward.
-- Remove the center headrest. Refer to HEADREST, REMOVING AND INSTALLING .
-- Remove the left headrest guide in the center backrest. Refer to HEADREST GUIDE, REMOVING AND INSTALLING .
-- Push the scraper from the Scraper Set :VAS6845 at the indicated position and engage the locking tab in direction of -arrow A-.
-- Remove the trim -1- upward from the pass-through in direction of -arrow B-.