LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Seat Frames) >> 72 Seat Frames >> Rear Seats >> Headrest Guide, Removing And Installing >> Headrest Guide, Removing And Installing, Q3 >> Removing

Headrest Guide, Removing And Installing, Q3: Removing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Fold the backrest slightly forward.

-- Remove the rear headrest. Refer to HEADREST, REMOVING AND INSTALLING .

-- Guide the Hook :T10538  in the headrest guide and as shown engage in the retainer.

GWWA72-12763Courtesy of AUDI OF AMERICA, LLC

-- Right headrest guide -1- : pull the locking tab -3- from the headrest guide with the hook inward in direction of -arrow C- and at the same time guide the headrest guide upward from the backrest frame in direction of -arrow B-.

-- Left headrest guide -2- : pull the frame -4- from the headrest guide with the hook inward in direction of -arrow A- and at the same time guide the headrest guide upward from the backrest frame in direction of -arrow B-.

TIP:

If the headrest guide does not release, proceed as follows:

-- Insert the Internal Puller (Kukko 21-1) :VAS251601  only to dimension -a- in the headrest guide and tighten the nut.

GWWA72-12251Courtesy of AUDI OF AMERICA, LLC

-- Position the Puller - Unit Injector :T10055  with the Puller - Unit Injector - Adapter 3 :T10055/3  on the Internal Puller (Kukko 21-1) :VAS251601  and remove the headrest guide.