Center Armrest, Removing And Installing, Q3: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Fold down the center armrest approximately halfway.
-- Guide the Backrest Panel Tool :3370 under the cover and hook it in at the bottom of the cover.
-- Remove the cover -1- carefully from the trim panel and unclip it in direction of -A arrows-.
-- Disengage the center armrest cover upward in direction of -arrow B- and remove.
-- Remove the bolts -2-.
-- Tilt the center armrest -1- slightly upward, disengage on the backrest with pass-through -arrows- and remove.