Seat Height Adjustment Motor, Removing And Installing, Power Seat Adjustment: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat to the highest position possible to keep the torsion bar tension as low as possible.
-- Remove the seat frame trim panel on the side sill side. Refer to SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING, SIDE SILL SIDE .
-- Disconnect the connector -1- at seat height adjustment motor.
TIP:
The lower bolt must be removed from below.
-- Push the cover and cushion on the seat pan near the threaded connections to the side.
-- Remove the bolts -2-.
-- Loosen the motor -3- for the seat height adjustment from the seat pan and remove.