Seat Functions Control Module, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Switch off the ignition.

-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Release the retaining tabs in direction of -arrows-.

Fig 1: Memory Seat/Steering Column Adjustment Control Module -J136-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the control module -1- from the bracket.

-- Release the connector safety catch and disconnect the connectors -2-.