Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the Infotainment system display. Refer to INFOTAINMENT SYSTEM DISPLAY, REMOVING AND INSTALLING .
-- Remove the bolts -3-.
-- Guide the bracket -2- with the Control Module for Emergency Call Module and Communication Unit -J949- -1- out of the instrument panel.
-- Release and disconnect the connectors -4-.
-- Release the retaining tabs at the Control Module for Emergency Call Module and Communication Unit -J949- -1- in the direction of -arrows-.
-- Remove the Control Module for Emergency Call Module and Communication Unit -J949- -1- from the bracket -2-.