Vehicle Interior Communication Antenna 2 -R365-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
-- Release the retaining tabs -2- at the center section of the instrument panel.
-- Remove the Vehicle Interior Communication Antenna 2 -R365- -1- from the center section of the instrument panel.
-- Release and disconnect the connector -3-.