Bumper Antennas, Removing And Installing, SPORTBACK: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release and disconnect the connector -1-.
-- Remove the nut -5- for the left bumper antenna -2-.
-- Remove the left bumper antenna -2- from the bracket -4-.
-- Remove the nuts -3- for the bracket -4-
-- Remove the bracket -4- from the vehicle body.