Overview - Lower Rear Lid Trim Panel, Sedan
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Lid Hinge Trim Panel
- Quantity: 2
- Refer to REAR LID TRIM, REMOVING AND INSTALLING, SEDAN
- Expanding Clip
- Quantity: 4
- Clip
- Quantity: 10
- Insert in the trim panel
- Remove the clips that are still in the rear lid mounting points using the Omega Clip Tool:T40280 .
- Replace damaged or deformed clips
- Anti-Theft Protection
- Clip into rear lid
- Refer to REAR LID TRIM, REMOVING AND INSTALLING, SEDAN
- Rear Lid Latch Trim Panel
- Expanding Nut
- Clip into rear lid
- Stop Strip Bracket
- Quantity: 2
- Clip into rear lid
- Stop Strip
- Quantity: 2
- Removing and Installing. Refer to REAR LID TRIM, REMOVING AND INSTALLING, SEDAN .
- Clip to the bracket
- Rear Lid Trim Panel
- Bolt
- 2 Nm
- Emergency Release Cover
- For North American Region only
- Unclip using a screwdriver
- Clipped in the rear lid trim panel
- Emergency Triangle
- Emergency Triangle Bracket
- Insert in the rear lid and press on it until it engages audibly