Front Pull Handle, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the door trim panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .
-- Place the door trim panel on a soft surface.
-- Remove the front armrest. Refer to FRONT ARMREST, REMOVING AND INSTALLING .
-- Unclip the trim -2- for the pull handle using the scraper from Scraper Set:VAS 6845 -arrows-, to do that, turn the scraper on its own axle.
-- Remove the remaining tabs and then remove the pull handle trim -1-.