Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the left air duct pipe. Refer to LEFT AIR DUCT PIPE, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

Fig 1: Identifying Engine Speed Sensor And Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- and remove the Engine Speed Sensor -G28-.