Cam Adjustment Actuator, Removing And Installing: Notes
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Cam Adjustment Actuator 1 -F366- : free up the wires and slightly push to the side.
-- Disconnect the connector -2-.
-- Remove the bolt -1- and the cam adjustment actuator.