Vibration Damper Seal, Replacing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .
-- Remove the seal -arrow- with the Seal Installer - Crankshaft: T40274 .
-- Clean the contact and sealing surface.
-- Push the seal -arrow- on the Seal Installer - Crankshaft: T10354 .
- The closed side of the seal points to the Seal Installer - Crankshaft: T10354 .
-- Push the seal -arrow- with the Seal Installer - Crankshaft: T10354 on the Vibration Damper Assembly Tool - Tensioning Pins: T10531/6 -item 1- and place on the lower timing chain cover.
-- Also screw in the Press Piece - Gearbox: T10375 and tighten the Vibration Damper Assembly Tool - Knurled Nut: T10531/4 .
-- Drive the seal in all the way using the Seal Installer - Crankshaft: T10354 .