Vacuum Pump, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Replace the seal after removal.
-- Make sure the seal is in the correct installation position.
-- Turn the vacuum pump yoke -1- so it engages in the groove on the camshaft when positioning the vacuum pump -arrows-.
-- Install the high pressure pump. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING .