Overview - Exhaust Temperature Regulation
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Shown on a vehicle with AWD.
- Exhaust Gas Temperature Sensor 4 -G648-
- Removing and Installing. Refer to EXHAUST TEMPERATURE REGULATION COMPONENTS, REMOVING AND INSTALLING .
- 45 Nm
- Particulate Filter Differential Temperature Sensor -GX41-
- Removing and Installing. Refer to EXHAUST TEMPERATURE REGULATION COMPONENTS, REMOVING AND INSTALLING .
- Nut
- Exhaust Gas Temperature Sensor 3 -G495-
- Removing and Installing. Refer to EXHAUST TEMPERATURE REGULATION COMPONENTS, REMOVING AND INSTALLING .
- 45 Nm
- Oxygen Sensor 1 after Catalytic Converter -GX7-
- Oxygen Sensor 1 Before Catalytic Converter -GX10-
- Bolt
- Tightening Specification. Refer to OVERVIEW - HEATED OXYGEN SENSOR - Bolt .
- Particulate Filter Differential Pressure Sensor -G1037-
- Removing and Installing. Refer to OVERVIEW - HEATED OXYGEN SENSOR - Particulate Filter Differential Pressure Sensor -G1037- .
- Bracket
- With control lines
- Bolt
- Tightening Specification. Refer to OVERVIEW - HEATED OXYGEN SENSOR - Bolt .
- Bolt
- Tightening Specification. Refer to OVERVIEW - HEATED OXYGEN SENSOR - Bolt .
- Bracket
- Union Nut
- Tightening Specification. Refer to OVERVIEW - HEATED OXYGEN SENSOR - Union Nut .
- Union Nut
- Tightening Specification. Refer to OVERVIEW - HEATED OXYGEN SENSOR - Union Nut .