Ribbed Belt TENSIONING Damper, Removing And Installing, Vehicle With Starter Generator: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING, VEHICLE WITH STARTER GENERATOR .
- If no laser marking -arrow- is present, create the marking with a suitable colored marker at >>11 o'clock<< (alignment parallel to the cylinder wall).
-- Remove the bolt -2-.
-- Remove the tensioner -1-.