Ribbed Belt TENSIONER, Establishing Assembly Condition
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Locking Pin: T10060A
- Adapter : T40263/1 , not illustrated
Procedure
- Tensioner removed. Refer to RIBBED BELT TENSIONING DAMPER, REMOVING AND INSTALLING, VEHICLE WITH STARTER GENERATOR .
-- Tighten the Adapter : T40263/1 -item 2- into the vise.
-- Align the tensioner to the adapter as shown.
-- To tension, position the wrench -item 1- to the tensioner and turn it counter-clockwise -arrow-.
-- Lock the tensioner using the Locking Pin: T10060A -item 3-.