Front Air Duct Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the air duct from the lock carrier. Refer to AIR DUCT ON LOCK CARRIER, REMOVING AND INSTALLING .

-- Loosen the hose clamps -1 and 2- and remove the air duct hose.

Fig 1: Identifying Clamps

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector for the Charge Air Pressure Sensor -G31-.

Fig 2: Disconnect Charge Air Pressure Sensor Connector

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamp -2-.

-- Free up the coolant hose on the clip -3-.

-- Remove the bolts -arrows-.

-- Remove the front air duct pipe.

-- Seal the open lines and connections with clean plugs from the Engine Bung Set :VAS 6122 .