Overview - Rear Door Trim Panel

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Rear Door Trim Panel

Courtesy of AUDI OF AMERICA, LLC

Door Trim Panel
- Allocation. Refer to the Electronic Parts Information (ETKA).
- Removing and Installing. Refer to REAR DOOR TRIM PANEL, REMOVING AND INSTALLING .
Rear Reflector
- Clip into the trim panel
Clip
- For door trim panel
- Quantity: 7
- Insert in the trim panel
Bolt
- For pull handle/armrest
- Quantity: 14
- 1.7 Nm
Window Frame Cover
- Removing and Installing. Refer to WINDOW FRAME COVER, REMOVING AND INSTALLING .
Bolt
- Quantity: 3
- 1.7 Nm
Trim Molding
- Equipped on some models
- Allocation. Refer to the Electronic Parts Information (ETKA).
- Removing and Installing. Refer to DECORATIVE INSERT, REMOVING AND INSTALLING .
Bolt
- Quantity: 7
- 1.7 Nm
Interior Door Mechanism
- Removing and Installing. Refer to INTERIOR DOOR MECHANISM, REMOVING AND INSTALLING .
Bolt
- For door trim panel
- Quantity: 3
- 2.5 Nm
Treble Speaker Trim
- Removing and Installing. Refer to TREBLE SPEAKER TRIM, REMOVING AND INSTALLING .
Lock Washer
- Quantity: 3
Decorative Trim
- Equipped on some models
- Allocation. Refer to the Electronic Parts Information (ETKA).
- Removing and Installing. Refer to DECORATIVE TRIM, REMOVING AND INSTALLING .
Pull Handle Trim
- Removing and Installing. Refer to REAR PULL HANDLE, REMOVING AND INSTALLING .
Armrest
- Removing and Installing. Refer to REAR ARMREST, REMOVING AND INSTALLING .
Pull Handle / Switch Mount
- Removing and Installing. Refer to REAR PULL HANDLE, REMOVING AND INSTALLING .
Bolt
- For the switch mount
- Quantity: 2
- 1.7 Nm