Overview - Lower Rear Lid Trim Panel, Sedan

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Rear Lid Lower Trim Panel (Sedan)

Courtesy of AUDI OF AMERICA, LLC

Rear Lid Hinge Trim Panel
- Quantity: 2
- Removing and Installing. Refer to REAR LID TRIM, REMOVING AND INSTALLING, SEDAN .
Expanding Clip
- Quantity: 4
Clip
- Quantity: 10
- Insert in the trim panel
- Remove the clips that are still in the rear lid mounting points using the Omega Clip Tool: T40280 .
- Replace damaged or deformed clips
Anti-Theft Protection
- Clip into rear lid
- Removing and Installing. Refer to REAR LID TRIM, REMOVING AND INSTALLING, SEDAN .
Rear Lid Latch Trim Panel
- Removing and Installing. Refer to REAR LID TRIM, REMOVING AND INSTALLING, SEDAN .
- Press on until it engages audibly
Expanding Nut
- Clip into rear lid
Stop Strip Bracket
- Quantity: 2
- Clip into rear lid
Stop Strip
- Quantity: 2
- Removing and Installing. Refer to REAR LID TRIM, REMOVING AND INSTALLING, SEDAN .
- Clip to the bracket
Rear Lid Trim Panel
- Removing and Installing. Refer to REAR LID TRIM, REMOVING AND INSTALLING, SEDAN .
- Press on until it engages audibly
Bolt
- 2 Nm
Emergency Release Cover
- For North American Region only
- Unclip using a screwdriver
- Clipped in the rear lid trim panel
Emergency Triangle
Emergency Triangle Bracket
- Insert in the rear lid and press on it until it engages audibly