Overview - Luggage Compartment Side Trim Panel, Sedan
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Lock Carrier Trim Panel
- Removing and Installing. Refer to LOCK CARRIER TRIM PANEL, REMOVING AND INSTALLING .
- Must engage in the pins
- Press on until it engages audibly
- Stretch the lip of the rear lid seal over
- Clip
- Quantity: 4
- Insert in the trim panel
- Remove any remaining clips from the mounting points using the Omega Clip Tool: T40280 .
- Replace damaged or deformed clips
- Clip
- Quantity: 2
- Insert in the trim panel
- Remove any remaining clips from the mounting points using the Omega Clip Tool: T40280 .
- Replace damaged or deformed clips
- Luggage Compartment Side Trim Panel
- Allocation. Refer to the Electronic Parts Information (ETKA).
- Removing and Installing. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, SEDAN .
- Press on until it engages audibly
- Stretch the lip of the rear lid seal over
- Expanding Clip
- Quantity: 4
- Removing with Pliers: T40172C
- Cover
- For the crossmember
- Expanding Clip
- Quantity: 2
- Removing with Pliers: T40172C
- Bag Hooks
- Removing and Installing. Refer to BAG HOOK, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Bolt
- 8 Nm
- Tie Down
- Removing and Installing. Refer to TIE DOWN, REMOVING AND INSTALLING .
- Cover
- For locking pins
- Clip into the trim panel