Tie Rod, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the boot. Refer to BOOT, REMOVING AND INSTALLING .
-- Turn the steering as follows:
- For the left tie rod, turn the steering wheel all the way to the right
- For the right tie rod, turn the steering wheel all the way to the left
-- Remove the tie rod.
- Torque Wrench Insert - Open Jaw: VAG1923
- Torque Wrench
CAUTION:
There is a risk of destroying the steering gear if the boot is faulty.
Moisture and dirt could enter.
- Check the splines on the steering rack for a visible lubricating film.
- If the film of grease is missing, replace the steering gear.