Coupling Rod, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Coupling Rod And Nut

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -arrow- of the coupling rod -1- on the suspension strut by counterholding with a four-point socket on the threaded pin if necessary.

-- Remove the coupling rod from the suspension strut.

-- Remove the nut -1- from the coupling rod -3- on the stabilizer bar -2- by counterholding with a four-point socket on the threaded pin if necessary.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the coupling rod from the stabilizer bar.