Threshold "A" In Mm
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- If the readout value is greater than the threshold "a" (table value): insufficient damping effect → replace shock absorber.
- If the readout value is less than the threshold "a" (table value): sufficient damping effect → shock absorber does not need to be replaced.
| Vehicle Type | Front Axle | Rear Axle | Note |
|---|---|---|---|
| A3 standard suspension, 1JA | in production | in production | No load fuel tank full tire pressure "partially loaded" |
| A3 with high-voltage system standard suspension, 1JA | in production | in production | |
| A3 sport suspension, 1JC | in production | in production | |
| A3 suspension with electronic damping, 1JP | in production | in production | |
| A3 heavy duty suspension, UC7 | in production | in production | |
| S3 suspension, 1JE | in production | in production | |
| S3 suspension with electronic damping, UB1 | in production | in production | |
| RS3 suspension, 1JR | in production | in production | |
| RS3 suspension with electronic damping, UB9 | in production | in production |