Minimum Curing Times For Bonded Windows
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- For safety reasons, use only non-conductive two-part adhesive when installing windshield and rear window with the materials listed below.
- The vehicle can only be used after the minimum curing time has elapsed.
- During the minimum curing time, the vehicle must be resting at room temperature (at least 15 °C (59 °F)) on a level surface.
| Window type | Adhesive | Minimum curing time in hours |
|---|---|---|
| Windshield | Two-Part Window Adhesive. Refer to Parts Information. | 2 |
| Rear Window | Two-Part Window Adhesive. Refer to Parts Information. | 2 |
| Side Windows | One-Part Window Adhesive for Side Windows. Refer to the Parts Information. | 6 |