Housing, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the cap -arrow-.
-- Pull the retaining bracket -2- with the Hook: T40207 -item. 1- outward -arrow-.
-- Pull the door handle -1- outward -arrow A- and at the same time push toward the rear -arrow B-, at the same time the housing -2- is pushed out of the mounting bracket.
-- Remove the housing.