LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Striker, Removing And Installing >> Striker, Removing And Installing, SPORTBACK >> Removing

Striker, Removing And Installing, SPORTBACK: Removing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the lock carrier trim panel. Refer to LOCK CARRIER TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the nuts -1 and 3- and remove the catch -2-.

Fig 1: Identifying Combination Nuts -1- And -3-, Striker Pin -2-
GWWA55-10449Courtesy of AUDI OF AMERICA, LLC