Rear Lid Seal, Removing And Installing, Sedan: Installing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Position the rear lid seal -1- on the body flange.

Courtesy of AUDI OF AMERICA, LLC

The butt joint -3- of the rear lid seal must be seated centered on the striker -2-.

-- Press on the entire length of the rear lid seal.