Overview - Rear Lid, SPORTBACK
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Striker
- Removing and Installing. Refer to STRIKER, REMOVING AND INSTALLING, SPORTBACK .
- Adjusting. Refer to HEIGHT ADJUSTMENT AT STRIKER, SPORTBACK .
- Nut
- Quantity: 2
- 21 Nm
- Nut
- Quantity: 2
- 21 Nm
- Bolt
- 8 Nm
- Adjusting Buffer
- Removing and Installing. Refer to ADJUSTING BUFFER, REMOVING AND INSTALLING, SPORTBACK .
- Adjusting. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .
- Gas-Filled Strut
Equipment versions with gas-filled strut:
- Removing and Installing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
- Venting. Refer to GAS-FILLED STRUT, VENTING .
Equipment version with rear lid motor:
- Overview. Refer to OVERVIEW - ELECTRIC REAR LID RELEASE .
- Dispose. Refer to PREPARE THE Rear Lid Drive Unit -VX69- /Rear Lid Drive Unit 2 -VX77- FOR DISPOSAL. .
- Mount
- With ball pin
- Bolt
- Quantity: 2
- 30 Nm
- Plug
- For the equipment version with gas-filled strut
- Boot
- Hinge
- Removing and Installing. Refer to HINGES, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- 12 Nm
- Nut
- Always replace after removing
- 20 Nm +45°
- Bolt
- Quantity: 2
- 30 Nm
- Mount
- With ball pin
- Rear Lid
- Removing and Installing. Refer to REAR LID, REMOVING AND INSTALLING, SPORTBACK .
- Adjusting. Refer to REAR LID, ADJUSTING .
- Release Button In Rear Lid Handle -E234-
- Component Location Overview. Refer to COMPONENT LOCATION OVERVIEW - CONTROLS IN LUGGAGE COMPARTMENT
- Rear Lid Lock Unit -VX25-
- With integrated Rear Lid Central Locking System Motor -V53-, Rear Lid Alarm Switch -F123-, Rear Lid Lock Cylinder/Anti-Theft Alarm/Central Locking Contact Switch -F124-
- Removing and Installing. Refer to REAR LID LOCK, REMOVING AND INSTALLING .
- Rear Lid Seal
- Removing and Installing. Refer to REAR LID SEAL, REMOVING AND INSTALLING, SPORTBACK .