LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Hood, Lids) >> 55 Hood, Lids >> Hood >> Striker, Removing And Installing >> Installing

Striker, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the striker according the marking made during removal.

-- Adjust the striker. Refer to SIDE AND HEIGHT ADJUSTMENT AT STRIKER .