Hood Latch Operating Lever, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Pull the clip -2- out of the release lever -1- slightly -arrow A- using a small screwdriver.
-- Pull the operating lever toward the rear -arrow B- to release the hood and hold it in this position.
-- At the same time, pull the release lever so it is level with the center of the vehicle and out of its mount -arrow C-.