Bumper Cover, Removing And Installing, A3/S3: Installing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Depending on the equipment version, the following additional work must be performed

-- Calibrate the blind spot detection. Refer to the appropriate Service Information .

Note the conditions here for a required calibration of the blind spot detection.

Tightening Specifications

Refer to OVERVIEW - BUMPER COVER
Refer to OVERVIEW - UNDERBODY TRIM PANELS