LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Bumpers) >> 63 Bumpers >> Front Bumper >> Center Vent Grille, Removing And Installing >> Center Vent Grille, Removing And Installing, A3/S3 >> Removing

Center Vent Grille, Removing And Installing, A3/S3: Removing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Remove the bumper cover end plate. Refer to BUMPER COVER END PLATE, REMOVING AND INSTALLING .

-- Release the retainers -arrows-.

GWWA63-12017Courtesy of AUDI OF AMERICA, LLC

-- Remove the molded foam part -1-.

-- Disconnect the connectors -3 and 4- and free up the wiring harness -2 and 5-.

GWWA63-12018Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- Release the retainers -1 and 3- and remove the air grille -2- from the bumper cover.

GWWA63-11985Courtesy of AUDI OF AMERICA, LLC