Bumper Cover, Removing And Installing: Notes
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- To complete the procedure, a second technician is required to be at the following position. Refer to Removing - Disengage the bumper cover side piece -3- from the side panel -arrow A- and remove the bumper cover -2- toward the front with the help of a second technician -arrow B-. .
- Depending on the equipment version, the following additional work must be performed. Refer to Depending on the version, the following additional work is required: .
Special tools and workshop equipment required
- Engine Bung Set: VAS 6122
- Drip Tray