Fuel Level Sensor -G-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Installation Instructions. Refer to OVERVIEW - FUEL DELIVERY UNIT/FUEL LEVEL SENSOR .
-- Insert the Fuel Level Sensor -G- into the guides on the fuel delivery unit and push downward until it engages.
-- Route and engage the wires on the fuel delivery unit.
-- Install the fuel delivery unit:
- TFSI Vehicles. Refer to Installing .
- TDI Vehicles. Refer to Installing .
- Vehicles with high-voltage system. Refer to Installing .