Accelerator Pedal Module -GX2-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Accelerator Pedal Position Sensor -G79- / Accelerator Pedal Position Sensor 2 -G185- Component Location
-- Disconnect the connector -2- from the accelerator pedal module, to do so press the release upward.
-- Remove the bolt -1-.
-- Remove the accelerator pedal module -3- from the mounting.