Need For Axle Alignment, Torsion Beam Rear Axle
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
A wheel alignment is necessary if:
- Vehicle shows handling problems.
- Involved in an accident.
- If axle components were removed and installed or replaced.
- Tire wear patterns are uneven.
After REMOVING and REINSTALLING Components.
| Rear axle | Wheel Alignment Check Required | |
|---|---|---|
| Yes | No | |
| Shock Absorber | X | |
| Coil Spring | X | |
| Axle Beam | X | |
After REPLACING components
| Rear axle | Wheel Alignment Check Required | |
|---|---|---|
| Yes | No | |
| Shock Absorber | X | |
| Coil Spring | X | |
| Axle Beam | X | |