LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Wheels, Tires, Wheel Alignment (Wheel And Tire Guide General Information)) >> 44 Wheels, Tires, Wheel Alignment >> Tire Wear >> Permitted Differences In Tread Depth >> Models With Horizontally Installed Engine

Models With Horizontally Installed Engine

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Tread depth difference on models with horizontally installed engine, such as A3, TT, Q3, A1...

Here the average difference between the front and rear axle must not be greater than 3 mm.

Average at front axle 2.0 mm

Average at rear axle 4 mm

Difference of front axle to rear axle 2 mm

Within the permissible tolerance of 3 mm

scientia non olet · About LEMON Manuals