LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Mechanical Components (Brake System)) >> 46 Mechanical Components >> Rear Brakes >> Brake Rotor, Removing And Installing >> Removing

Brake Rotor, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING .

-- Remove the brake carrier. Refer to BRAKE CARRIER, REMOVING AND INSTALLING 

CAUTION:

There is a risk of damaging the brake rotors if force is used.

- Do not use force to separate the brake rotor from the wheel hub.

- Use the rust remover.

-- Remove the bolt -arrow- and remove the brake rotor.

Fig 1: Identifying Bolt And Brake Rotor
GWWA46-10405Courtesy of AUDI OF AMERICA, LLC