Parking Brake, Manually Loosening

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Due to a mechanical or electrical malfunction, it may be required to mechanically release the parking brake in order to move the vehicle.

Special tools and workshop equipment required

Hex Socket: T10621

Procedure

CAUTION:

Risk of accident due to the vehicle rolling away.

- Before removing the parking brake motor, secure the vehicle from rolling.

-- Remove the rear wheel. Refer to the appropriate Service Information .

-- Disconnect the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Remove the parking brake motor from the brake caliper, while doing so turn the parking brake motor back and forth.

-- Slightly turn back the input shaft using the : T10621 -item A- until the parking brake motor can be positioned correctly.

Courtesy of AUDI OF AMERICA, LLC

-- After eliminating the fault, install the parking brake motor. Refer to LEFT AND RIGHT PARKING BRAKE MOTOR -V282- / -V283-, REMOVING AND INSTALLING .

Tightening Specifications

Refer to OVERVIEW - PARKING BRAKE
Refer to WHEEL BOLTS TIGHTENING SPECIFICATION .