Brake Caliper, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the affected front wheel. Refer to the appropriate Service Information .
-- Disconnect the connector -arrow- for the brake pad wear indicator contact from the right brake caliper.
- For easier removal of the brake caliper from the brake pad push back the brake pad -3- slightly as shown using suitable pliers -1-.
- To prevent damage to the surface on the brake caliper, place a piece of rubber -2- or similar between the pliers and brake caliper.
-- Remove the bolts -arrows- and carefully remove the brake caliper with the brake carrier and the installed brake pads from the brake rotor.
CAUTION:
There is a risk of damaging the brake hose due to the weight of the brake caliper.
- Never let the brake caliper hang on the brake hose.
-- Hang the brake caliper using a suitable wire.
CAUTION:
There is a risk of damaging the brake caliper piston if handled incorrectly.
- Never activate the brakes if the brake caliper is removed.