Brake Pedal, Disconnecting From Brake Booster
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Release Tool: T10159B
Procedure
-- Press and hold the brake pedal -1- in the direction of the brake booster. (Shown on a removed pedal assembly.)
-- Insert the : T10159B -item A- and pull in the direction of the driver seat. While doing so, counterhold at the brake pedal so that it does not move toward the rear. While doing so, the mount retaining tabs -3- will be pushed out of the pushrod ball head -2-.
-- Push the Release Tool and the brake Pedal at the same time toward the driver side, this will pull the brake pedal off the push rod ball head.
4 - Mounting Bracket