Trailer Hitch Socket, Removing And Installing - Version 1: Removing

-- Turn off the ignition and remove the key.

-- Remove the bolts -arrows-.

Fig 1: Identifying Trailer Hitch Wiring Socket Components

Courtesy of AUDI OF AMERICA, LLC

-- Detach the socket from the retaining plate.

Socket with Rear Fog Lamp Shut-Off Contact Switch -F216- :

Fig 2: Identifying Switch Connector And Connector At Socket

Courtesy of AUDI OF AMERICA, LLC

-- Remove harness connector -2- for the Rear Fog Lamp Shut-Off Contact Switch -F216- and harness connector -1- from the Trailer Socket -U10-.

Socket without a Rear Fog Lamp Shut-Off Contact Switch -F216- :

Fig 3: Pressing Multi-Pin Connector Out Of Socket

Courtesy of AUDI OF AMERICA, LLC

-- Press multiple connector -1- in direction of -arrow- out of socket -2-.

Version 1

Fig 4: Releasing Securing Tabs And Retainer Clips

Courtesy of AUDI OF AMERICA, LLC

-- Release securing tabs in direction of -arrows- and then release retainer clips -1 and 3 through 5-.

-- Remove the retainer from the connectors -2-.

Version 2

Fig 5: Releasing Securing Tabs And Retaining Clips

Courtesy of AUDI OF AMERICA, LLC

-- First release securing tabs in direction of -arrows- and then retaining clips -1, 2, 3, 4, 6, and 7-.

-- Remove the retainer from the multi-pin connector -5-.