Transmission Tightening Specifications, 2.0L TDI And 2.0L TFSI
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- The tightening specifications apply only to lightly greased, oiled, phosphated or blackened nuts and bolts.
- Additional lubricants, such as engine oil or transmission fluid are permitted, but lubricants containing graphite are not.
- Do not use any ungreased parts.
- Tightening specification tolerance: ± 15%.
Transmission to Engine:
| Item | Bolt | Tightening Specification |
|---|---|---|
| 1, 2 and 3 | M12 x 60 M12 x 70 (only TT6 engine) |
|
| 4 and 8 | M12 x 80 | 80 Nm |
| 5, 6 and 7 | M10 x 60 |
|
| A | Alignment sleeves for centering | |
| Component | Tightening Specification |
|---|---|
| Cable bracket on the oil pan (transmission cover) | 10 Nm |
| Ground wire on the lower starter bolt | Refer to the appropriate Wiring Diagram ; ground connections on transmission |