Tools For Transmission Fluid Change
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Oil Filler: VAS6262A with Oil Filler - Adapter 1: VAS6262/1
- Used Oil Collection and Extraction Unit: SMN372500
- If necessary: Oil Filler - Adapter 6: VAS6262/6 or Oil Filler - Adapter: VAS6262/7
- Original 1 liter transmission fluid container and dual-clutch transmission fluid. Refer to Parts Information for the part number.
- Vehicle Diagnostic Tester
- Protective Eyewear
- Acid-Resistant Safety Gloves
Length of Bleed Pipe on Oil Filler : VAS6262A , Measuring and Shortening if Necessary
The pipe must be shorted to dimension -a- so that the bleed pipe on the adapter for the Oil Filler: VAS6262A does not touch the bottom on some containers.
- Dimension -a- = 210 mm.
- Dimension -a- is measured starting from the shaft (the green surface in the magnified area) on the adapter for the Oil Filler: VAS6262A .
-- Mark the dimension on the bleed pipe and shorten it using the Brake Line Tool Kit - Pipe Cutter: VAS6056/2 .
-- Clean the Oil Filler: VAS6262A .