LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Wheels, Tires, Wheel Alignment (Wheel And Tire Guide General Information)) >> 44 Wheels, Tires, Wheel Alignment >> Tire Pressure Monitoring System >> Metal Valve, Removing And Installing >> Metal Valve, Removing And Installing, Version 3 >> Installing

Metal Valve, Removing And Installing, Version 3: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If the metal valve is still on the sensor, pay attention that the sensor does not get damaged when removing it.

Do not grasp the sensor with pliers or similar tools.

All parts from the repair kit must be used.

-- Insert the square head screw into the sensor and install the metal valve loosely.

-- Install the tire pressure monitoring sensor.

scientia non olet · About LEMON Manuals