Transmission Fluid Pan, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- General repair instructions. Refer to GENERAL REPAIR INFORMATION .
- Guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the subframe crossbrace. Refer to SUBFRAME CROSSBRACE, REMOVING AND INSTALLING .
-- Remove the tunnel crossmember. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .
-- Remove the transmission support with the transmission mount. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
-- Drain the ATF. Refer to ATF, DRAINING AND FILLING .
-- Free up the wires.
-- Remove the bolts from the ATF pan in the sequence -12 through 1-.
-- Remove the ATF oil pan.